4 671.00 EUR excl. VAT
|Stage 5 350Hp, 450Nm + MapTuner (Maptun software Saab 9-5 1998-)|
|JT 3" Complete w/ race catalyst 9-5|
In short: 3" JT complete exhaust with race catalyst.
For whom: For those wanting better spool-up, very high top end and a sporty sound!
Details: 3" (76 mm) exhaust system manufactured from 1,5-2 mm double side aluminized steel. Sound level according to ISO R362: 77 dbA (+2 db). Back pressure reduction: 50% (appr. 600 Pascal). Oval 90x120mm stainless polished tail pipe. NB! On MY02 and up non-Aero models, the rear spoiler needs to be modified to "Aero look" to allow space for tail pipe.
High impendance fuel injectors from Siemens-Deka.
Flow capacity 630 cc at 3.0 bar fuel pressure.
Suitable for both T5 and T7 cars.
Price is per injector. Delivered in sets of four flow-matched injectors.
NB! Requires modified software to function properly!
|MapTun Sport Air filter 9-5 98-|
In short: High flowing air filter with very good filtration properties. Drop-in install in stock airbox.
MapTun Performance are proud to offer replacement air filters available for most Saab models. Each filter is made to the highest quality. The panel is designed to increase horsepower and acceleration whilst providing excellent filtration. The MapTun Performance logo is incorporated into each air filter and is a direct replacement for the panel in your car.
In short: "Bolt-on" replacement turbocharger upgrade for output up to 350 hp.
For whom: For 9-5 Aero/2.3T/220 owners wanting power beyond stage 3 with a 100% bolt-on install!
Details: New turbocharger, based on the MHI TD04HL-15T, but with a ported compressor and turbine housing and upgraded compressor wheel (-18T instead of -15T). 100% bolt-on install on cars equipped with MHI TD04HL-15T: B235R (9-5 Aero) and 9-5 2.3T/220. Clipped turbine blades and a flow capacity of appr. 350 hp. Stock TD04 turbocharger (core) to be sent back within 7 days.
|Stock 9-5 Aero inlet pipe|
*Stock 9-5 Aero inlet pipe 06-
Only suitable for short-neck TD04.
In short: Recently developed high performance intercooler designed for 99,9% bolt-on replacement of stock intercooler. High flowing core with low back pressure and cast end tanks make this an excellent upgrade on any tuned 9-5!
For whom: For those wanting performance beyond stage 3!
Details: Cast end tanks sustains high boost without the leakage associated with the stock 9-5 intercooler when increasing boost above 1,4-1,5 bar. Dramatically improved charge air cooling allowing high power output even during high ambient temperatures and long WOT runs. Designed for 99,9% bolt-on replacement of stock intercooler. Stock fitments and hoses retained. Measurements (excl. end tanks): Height 350 mm, width 580 mm, thickness 50 mm.
Tillverkare: Forge Motorsport
In short: Stock B235R clutch kit consisting of pressure plate and clutch disc. Bolt-on install on all 9-5 models. Will handle up to 450 Nm of torque with excellent driveability!
|Forge Pistons 9-3/9-5 2.3T, STD|
Forged pistons from Wössner in Germany.
Standard cylinder bore, 90.0 mm.
In short: Fuel rail washers, allowing installation of longer than stock injectors.
In short: NGK Spark plugs for use on both stock and tuned T5 and T7 cars. Please consult your owner´s manual to verify correct plug type for your car.
In short: Walbro 255 LPH, in-tank high performance fuel pump, for installation in stock fuel tank assembly. Flow capacity 255 litres/hour, which can supply appr. 500 hp. 95% bolt-on install.